Automatic Transfer Switch RM Lock G2
The ATS3020RM LOCK G2 is a highly available automatic transfer switch with two power inputs. It offers a high redundant power supply. If the primary voltage source fails, the ATS automatically switches to the alternative voltage source without affecting the connected devices. The power supply remains intact. The network interface makes it possible to manage the ATS via the Internet and SNMP.
19″ Automatic Transfer Switch with IEC Lock C13 Socket for Equipment Installation
On the modern LC display of the ATS, the consumer can follow the current energy consumption. The ATS measures current, voltage, phase angle, power factor, frequency, active, apparent and reactive power.
Some features and characteristics
- Automatic switching from primary grid to secondary grid -> primary grid freely selectable
- Safe switching even with phase offset
- Current current display directly on the device
- Measurement of current, voltage, phase angle, etc.
- Visual and acoustic notification of the operating status
- Self-locking IEC-Lock sockets
- Network interface (10/100MBit/s)
- IPv6 ready
- IP Access Control
- HTTP/HTTPS, SSH, E-Mail(SSL,STARTTLS) DHCP, Syslog
- SNMPv1, v2c, v3 (Get/Traps)
- Configuration and control via Telnet
- Radius, MODBUS TCP and MQTT
- Input: 2xC20 16A 230VAC
- Output: max. Electricity 16
-1×4-speed C13 IEC LOCK 10A
-1×4-way C13 IEC LOCK 10A with thermal fuse
-1x C19 IEC LOCK 16A -
Dimensions: 439x44x195mm (19″x1U)
