Transfer switches, ePDUs, power strips and bypass switches
The transfer switch ATS3020RM LOCK G2 supplies your operation with sufficient power, even if a power source should fail. The Automatic Transfer Switch (ATS) has two mains inputs and therefore offers a redundant power supply. If the primary power source fails, the ATS3020RM Lock automatically switches to the second source without affecting the connected devices of your IT.
The built-in network interface also makes it possible to manage the transfer switch via the Internet and SNMP and to retrieve important data and information. The ATS transfer switch can also be easily integrated into any network and building management system.
The ATS 3020RM Lock features patented IEC Lock technology, which features pull-proof connectors and cables. This prevents accidental disconnection of the plugs and at the same time increases security in your IT environment. We recommend the ATS for any UPS system and power distribution. So that the highest level of safety and availability is guaranteed in your company.
The advantages
- Redundant power supply in the 19" rack
- Automatic Power Transfer Switch for 19" Server Cabinet
- In the event of a power failure, guaranteed switching to 2nd power supply
- Status information via floating contacts or SNMP
- C14 10A, C20 16A, CEE3*16A plug and Schuko plug available as input
- IEC Lock: pull-off plugs for more safety
- Installation in network and 19" server cabinets
- IEC Lock Output Sockets
- only 1 U installation height and 195mm depth (rack version)
- UltraFastSwitch for absolutely safe switching
Our products on the topic
Transfer switch ATS3020RM Lock is available in the following versions:
- ATS3020RM LOCK G2 CEE
- ATS3020RM LOCK G2 C14
- ATS3020RM LOCK G2 C20
- ATS3020RM LOCK G2 Schuko
19″ Power Strips and ePDUs for Network and Rack
- ePDU: Switching and measuring outputs and IT equipment
- IEC Lock technology: pull-proof plugs
- Schuko, clamps, C14, C13, CEE and much more.
- Installation in the rack horizontally or vertically possible
- Ideal for network cabinets and IT racks
Manage your power supply through ePDUs
Due to the current technological change and advancing digitalization, the energy demand in a company is also increasing. In connection with this, the operators and consumers of data centers need highly developed and secure equipment for energy supply and monitoring. Due to the increasing requirements, the necessary control of processes in server cabinets, rack systems and entire infrastructures is also required. These must be managed and controlled by the user or fully automatically.
ePDUs (Enclosure Power Distribution Units) are rack-based, intelligent power distribution solutions that enable reliable and cost-effective power distribution in the enterprise, thus guaranteeing a better understanding and more targeted recording and control of power consumption in the data center. The ePDUs have been designed to cover the most common requirements of most modern server rooms and IT infrastructures. The standard series of ePDUs is equipped with either IEC Lock sockets (pull-proof plugs) or with the common, country-specific sockets.
External Bypass Switch EBS3000RM Lock
UPS Maintenance with EBS External Bypass Switch
An efficient and optimally running UPS system should be regularly maintained and serviced by a well-trained UPS system technician. The use of an external mechanical bypass switch (EBS) is recommended, which makes it possible to physically remove the UPS system from the system during operation without endangering the power supply. The consumer can switch between the UPS current or the normal mains current. The great advantage of the external bypass switch is that the UPS system can be disconnected from the system without malfunctions or interruptions, even during operation, and can thus be easily and flexibly maintained or replaced.
The EBS (external bypass switch) is available as a wall-mounted version or in a 19″ form for server and network cabinets. With only 1U (height unit), the external bypass switch (19″ version or wall mounting) is considered to be particularly space-saving in the rack and also has IEC Lock technology.
External bypass switch for the UPS system
- Installation in network, 19″ server cabinets or wall mounting
- IEC Lock Output Sockets
- only 1U installation height and 155mm depth (rack version)
- UltraFastSwitch for absolutely safe switching
- Different input and output variants possible
19″ power strips for server cabinets and EDP
To give you more freedom in the design and setup of your server rack or the entire power distribution or power distribution. IT infrastructure, our 19″ power strips are excellent. Thanks to the versatile inputs and outputs as well as colours and extensions, the user can optimally supply and manage his IT infrastructure in the 19″ server cabinet.
Since safety and availability are also of the utmost importance here, we recommend the power distributors with the unique and patented IEC Lock technology, which prevents unintentional disconnection of the cables.
Benefit from our expertise
25
Years of experience
103
successfully implemented
Server Room Projects
50
Colleague
300+
satisfied customers in the
Domestic and international
Together we configure your data center container according to your requirements and wishes!
References
SONNENTOR opted for a modern and energy-efficient server room solution in a 20f data center container. This was individually installed and built with the latest IT infrastructure.
